Submitted by admin on Wed, 02/23/2011 - 2:07pm
Embedded Scribd iPaper - Requires Javascript and Flash Player
Download document as PDF
Enable JavaScript in your browser to view this document as it was initially formatted.
Information below is provided on how to check for leaks in the home and determine your current water usage. Check for leaks: Use the low flow indicator on the meter to check for leaks. This is the small red triangle, which if moving indicates that there is a flow going through the meter. If the red triangle is movingand there is no water currently being used in the house- then a leak is evident (slight movement of the red triangle back and forth is normal and does not indicate a leak). Below: Example of a water meter dial where the meter reading is located. Note the small red triangle used for leak detection.
Water Usage Determination: Water is billed in gallon increments. To determine what your water consumption has been since your last bill: 1. Obtain a reading from your water meter.
2. Locate the Current Meter Reading on your last bill. 3. Subtract the Current Meter Reading from the reading obtained from your water meter.
This document is © 2011 by admin - all rights reserved.
Home
Summer Water Management Program
How To Read Your Water Meter
Pay Online
Frequently Asked Questions
Water Treatment Facility
Consumer Confidence Report 2010
Rules & Regulations
Meeting Agenda's
Calendar of Events
Related Links
